| Power: |
250 W RMS per channel into 8 Ω
30 W pure class A
1000 W RMS on lower impedance |
| Sensitivity: |
1 V or 2 V RMS |
| Bandwidth: |
0 Hz to 120 KHz, +0/-0.5 dB |
| Crosstalk: |
Not related for mono amplifiers |
| Signal-to-noise ratio: |
Typically 110 dB
ASA “A” weighted |
| THD+N: |
< 0.03% |
| Input type: |
XLR balanced
RCA unbalanced |
| Input impedance: |
88 KΩ on balanced input
44 kΩ on unbalanced input |
| DC filter: |
Toggle switch allows to cut the DC of incoming signals |
| Protection: |
Overheating > +70° C (158° F) |
| Remote in and out: |
1/8″ jacks in and out can trigger the amplifier on or off from a Nagra MPS or a home automation system |
| Power cord: |
IEC C19 this is not the standard IEC but a larger 20A plug |
)
!